NAASCO has served the aviation industry for over 35 years as a FAA and EASA approved repair station and our leadership team brings a combined electrical, mechanical, and avionics experience of over 250 years.

NAASCO has served the aviation industry for over 35 years as an FAA and EASA approved repair station and our leadership team brings a combined electrical, mechanical, and avionics experience of over 250 years.

Serving Best Quality

Opening its doors in April 1984, NAASCO has served the aviation industry for over 35 years as an FAA and EASA approved repair station and our leadership team brings combined electrical, mechanical, and avionics experience of over 250 years.  During this time, NAASCO has changed the aviation industry by introducing our specialized designed engineering solutions that focuses on improved reliability while solving planned obsolescence.  Two of our most successful product offerings are our starter generator ETR/Mercury Mod and our Sil-Met contact, relay, and terminal block solutions.

ETR-20™ and ETR-25™ Mercury Mod™

In 1992, NAASCO introduced the first in a series of starter generator improvements with the introduction of the original “Long Life” brush. Consequently, allowing operators to reach TBO (Time Between Overhaul) without a brush change and reducing commutator wear by a factor of ten. This revolutionary new brush was given the trademark “ETR”, an acronym for Electrographitic Treated Resins.

The momentum continued with the introduction of NAASCO’s proprietary ETR-20 improvement program which is a FAA approved addendum to the 1960’s technology OEM overhaul manuals. Two years later we released to the industry the patented ETR-25 “Mercury Mod”, a cooling modification for certain 150-amp starter generators and most recently for 200-amp units. The technology continues to include electric motors for blowers, actuators, pump motors, and more.

Mercury Mod™
and ETR™

In 1992, NAASCO introduced the first in a series of starter generator improvements with the introduction of the original “Long Life” brush. Consequently, allowing operators to reach TBO (Time Between Overhaul) without a brush change and reducing commutator wear by a factor of ten. This revolutionary new brush was given the trademark “ETR”, an acronym for Electrographitic Treated Resins.

The momentum continued with the introduction of NAASCO’s proprietary ETR-20 improvement program which is a FAA approved addendum to the 1960’s technology OEM overhaul manuals. Two years later we released to the industry the patented ETR-25 “Mercury Mod”, a cooling modification for certain 150-amp starter generators and most recently for 200-amp units. The technology continues to include electric motors for blowers, actuators, pump motors and more.

Skurka APC Starter Generator jpg fileSkurka APC Starter Generator jpg file
Starter Generator Safran Lucas 23081 018 AlternateStarter Generator Safran Lucas 23081 018 Alternate
Starter Generator Safran Lucas 23081 018 AlternateStarter Generator Safran Lucas 23081 018 Alternate

We talk a lot about hope helping and teamwork

Lorem ipsum dolor sit amet, adipiscing elit sed do eiusmod tempor incididunt ut labore ipsum et dolore magna.

Sil-Met™

Starting in 1988, NAASCO began working closely with the engineering department at FedEx to develop cost-effective repair solutions for the expensive relay contacts used in their Boeing 727 aircraft.  After four years of testing and thousands of flight hours, our repair process proved to be flawless, opening the doors for our Sil-Met™ repair solutions.  This cutting-edge technology allows previously consumable contacts and terminal boards to be repaired, renewed, and placed back into service. Presently, our exclusive Sil-Met™ processes can be applied to most power relays used on helicopters, regional, corporate, military, and commercial aircraft.

In addition to our specialized engineering solutions, our capabilities also include but are not limited to; Starter Generators, Power Relays and Contactors, Inverters, Converters, Power Supplies and GCU’s, Lavatory and Water Pumps, Fans, Actuators, Blowers, Air Valves, Search and Landing Lights, Strobes, Dimmer Controls, Actuators, Windshield Wiper Motors, and Landing Light Motor Support. The capabilities list is constantly expanding due to the request for solutions from our customers.

Motor Rosemount jpg fileMotor Rosemount jpg file
Motor-ECE-4195798-1-225x300Motor-ECE-4195798-1-225x300
Motor Eaton jpg fileMotor Eaton jpg file

Sil-Met™

Starting in 1988, NAASCO began working closely with the engineering department at FedEx to develop cost-effective repair solutions for the expensive relay contacts used in their Boeing 727 aircraft.  After four years of testing and thousands of flight hours, our repair process proved to be flawless, opening the doors for our Sil-Met™ repair solutions.  This cutting-edge technology allows previously consumable contacts and terminal boards to be repaired, renewed and placed back into service. Presently, our exclusive Sil-Met™ processes can be applied to most power relays used on helicopters, regional, corporate, military and commercial aircraft.

In addition to our specialized engineering solutions, our capabilities also include but are not limited to; Starter Generators, Power Relays and Contactors, Inverters, Converters, Power Supplies and GCU’s, Lavatory and Water Pumps, Fans, Actuators, Blowers, Air Valves, Search and Landing Lights, Strobes, Dimmer Controls, Actuators, Windshield Wiper Motors and Landing Light Motor Support. The capabilities list is constantly expanding due to the request for solutions from our customers.

Electro-Mechanical

In addition to our specialized engineering solutions, our capabilities also include but are not limited to; Starter Generators, Power Relays and Contactors, Inverters, Converters, Power Supplies and GCU’s, Lavatory and Water Pumps, Fans, Actuators, Blowers, Air Valves, Search and Landing Lights, Strobes, Dimmer Controls, Actuators, Windshield Wiper Motors, and Landing Light Motor Support. The capabilities list is constantly expanding due to the request for solutions from our customers.

Electro-Mechanical

In addition to our specialized engineering solutions, our capabilities also include but are not limited to; Starter Generators, Power Relays and Contactors, Inverters, Converters, Power Supplies and GCU’s, Lavatory and Water Pumps, Fans, Actuators, Blowers, Air Valves, Search and Landing Lights, Strobes, Dimmer Controls, Actuators, Windshield Wiper Motors and Landing Light Motor Support. The capabilities list is constantly expanding due to the request for solutions from our customers.

Meet Our Team

Manager of Engineering

Customer Service Manager

Accounting and Office Coordinator

Office Manager